Wire & Cable Machinery Specialists

The wire
leaving your
machine
defines
everything
after it.

High-speed drawing lines, continuous annealing systems, and precision stranding equipment — engineered for production professionals who need real data, not brochures.

Every wire break at 40 m/s is an engineering failure, not bad luck.
Uncontrolled slip generates heat. Heat degrades dies and capstans. Wear breaks wire geometry. And that wire reaches the next process.

Request Information
Request Information

Get in touch with our engineering team. No commitment.

Real data from production-ready equipment
For engineers & plant managers
Your data is never shared with third parties
✓
Request received

Our team will be in touch with you shortly.

100+
Years manufacturing
47+
Plants · 12 countries
40
m/s max line speed
1914
Engineering heritage
01 Customized Machinery
02 24/7 Smart Monitoring Online
03 Ultra-Efficient IE5 Drives Save up to 40%
04 Fast Delivery 3 months standard
05 Servomotor FESTO Motors Siemens
06 Leasing Assistance
07 Heavy-Duty Construction 24 tons frame
Complete production line

Five machine systems.
Full technical breakdown.

From rod breakdown to extrusion — complete technical information on each system. Navigate directly to the machine you need.

01
Rod Breakdown
ST5035215M
02
Drawing & Annealing
SMF120/16/24M
03
Double-Twist Stranding
STB800SS
04
Extruders
45–150mm
05
Busbar / Wire T120
650 mm² input
01 Rod Breakdown
No foundation required

Twin-Rod Breakdown Machine

ST5035215M — Multimotor Highspeed · Cu / Al / Al-alloy · 2 wires simultaneously

40m/s
Our Working Speed
40%
Save Energy · IE5 Drives
15
Drawing Steps · Last Rotative & Motorized
1 or 2
Wires
NO
Cooler Needed
3
Months Delivery
Speed
40 m/s real
Energy
Save 40% · IE5
Inlets
9.5mm Al · 8mm Cu
Steps
15 drawing
Wires
1 or 2
Delivery
3 months

Individual capstan motorization. Two wires simultaneously. Minimum-slip at 40 m/s real working speed.

Why it matters

40% energy cut from day one. No cooler needed — lower CAPEX. Rotating final die improves concentricity. 24-ton frame for long-term stability.

See more
Your Inquiry
Additional specifications
Min. outlet — Cu1.10 mm
Max. outlet6.0 mm
Capstans500 + 350 mm
Emulsion6,000 L
Final dieMotorized
CoolingWater-cooled
Rod Breakdown Machine
02 Drawing + Continuous Annealing
No foundation required

16-Wire Drawing & Annealing Line

SMF120/16/24M + HRC25/16/430M — Hard Copper 450 N/mm² · Bright oxide-free wire

40m/s
Our Working Speed
40%
Save Energy · IE5 Drives
16
Simultaneous Wires
24
Motorized Steps
430kVA
Annealer Power
6,000A DC
Annealing Current
Working speed
40 m/s real
Energy savings
Save 40% · IE5
Wires
16 simultaneous
Steps
24 motorized
Annealer
430 kVA
Delivery
3 months

16-wire drawing with continuous DC annealing. 24 motorized steps, zero slip. Full synchronization — consistent geometry across all strands.

Why it matters

Three-zone DC annealer under N₂/steam, automatic flow regulation. Nickel contact rings (5mm), fast replacement. Output: bright, oxide-free wire.

See more
Your Inquiry
Additional specifications
MaterialHard Cu 450 N/mm²
Inlet2.50 mm
Outlet 16W0.20–0.50 mm
RingsZirconia
AnnealingN₂ / steam
Cooling23 m³/h
Drawing & Annealing Machine
03 Stranding + Motorized Pay-Off

Double-Twist Stranding

STB800SS + SDMD800/630 — Concentric & compact conductors · Full servo synchronization

300m/min
Max. Line Speed
5,000TPM
Max. Twists
275N
Max. Tension
S/Z
Lay Direction
Bobbins
560 / 630 / 800 mm
Max. cable dia.
16 mm
Line speed
300 m/min
Max. twists
5,000 TPM
Tension
10–275 N
Delivery
3 months

Full AC servo synchronization. Real-time laser diameter control — continuous correction, not a startup setting.

Why it matters

PID tension control 10–275 N. Individual break detection per position. FESTO traversing unit: zero maintenance. Sound-insulated cabin.

See more
Your Inquiry
Additional specifications
Bobbin560–800 mm
Cable section0.25–16 mm²
Compaction10%
Capstan2 × 165 mm
Tension10–275 N
DetectionPer position
Double-Twist Stranding Machine
04 Extrusion

Extruders

45 / 60 / 90 / 120 / 150 mm — HFFR · XLPE · PVC · Own screw and heads

45mm
= 60mm Standard Output
1,100kg/h
PVC · 120mm
800kg/h
HFFR · 120mm
700kg/h
HDPE · 120mm
600kg/h
LDPE · 120mm
5
Available Sizes
Size
45–150 mm
Output
PVC 1,100 kg/h
Screw
Own manufacture
Materials
PVC · HFFR · XLPE
Drive
AC Servo Siemens
Delivery
3 months

45mm output matches a standard 60mm — same throughput, lower cost and footprint. Own-manufactured screws and heads. Full material range.

Why it matters

Zero dependency on third-party components. Direct support, faster delivery, full tolerance control. 5 sizes: 45 · 60 · 90 · 120 · 150mm.

See more
Your Inquiry
Specifications
Sizes45–150 mm
MaterialsPVC · HFFR · XLPE
Output PVC1,100 kg/h
Output HFFR800 kg/h
DriveSiemens AC
ControlSiemens PLC
Extruders Machine
05 Busbar / Wire Drawing

Busbar / Wire T120

Heavy-section copper wire drawing with integrated annealing

650mm²
Max. Input
10mm²
Min. Output
Annealer
Integrated
Input section
650 mm² max
Output section
10 mm² min
Annealing
Integrated DC
Speed
25 m/s
Material
Copper 450 N/mm²
Delivery
3 months

Heavy-section copper drawing with integrated annealing. For power distribution, transformers, and large cross-section conductors.

Why it matters

650 mm² to 10 mm² in a single integrated line. No intermediate handling. Precise dimensional control on large cross-sections.

Request information
Your Inquiry
Technical specifications
Max. input650 mm²
Min. output10 mm²
AnnealingIntegrated DC
Power350 kVA
Speed25 m/s
MaterialCu 450 N/mm²
Busbar / Wire T120 Machine
What you will receive

Engineering data.
Not marketing copy.

Full performance parameters

Speed, diameter ranges, step configurations, motor specs, cooling requirements — the data your team needs to assess line compatibility and process fit.

Design rationale

Why individual capstan motorization. Why minimum-slip at 40 m/s. Why three-zone annealing with N₂. Engineering decisions explained without commercial language.

Material & application criteria

Selection guidance by material (Cu / Al / Al-alloy), target diameter, downstream process requirements, and production volume. Real criteria for real specifications.

Get access

For engineers
by engineers.

This is not a product catalogue. It is a technical reference document designed for professionals who know the difference between a profitable line and a costly one is measured in millimetres, degrees, and metres per second.

If your plant works with copper, aluminium, or aluminium alloys — and production consistency is non-negotiable — this content is for you.

  • Technical data on rod breakdown, drawing, annealing, stranding, extrusion, and busbar systems
  • For plant engineers, technical managers, and operations directors
  • ISO 9001:2015 · Manufactured in Spain · 47+ plants in 12 countries
  • 100+ years of production heritage · Engineering since 1914
Request Information

Fill in your details and our team will get back to you.

Real technical data · No spam · No commitment
Your data is never shared with third parties
✓
Request received

Our team will be in touch with you shortly.